Rockarmor Premium Bullbar Frontal Combo To Suit Toyota Prado 90/95 1996-2002

Bullbar Offroad Frontal Pack Toyota Prado 90/95 1996-2002

Includes:

• Rockarmor Steel Premium Bullbar (No bumper cut required)
• Rockarmor 12,000 pound Winch (wireless controller & synthetic winch rope)
• Rockarmor 9" LED Phantom Spotlights (with wiring loom and internal switch)

PREMIUM BULLBAR (BUMPER CUT REQUIRED FOR THIS VEHICLE)

Designed & tested in Australia, Rockarmor's Premium Steel Bullbar provides your vehicle with the ultimate vehicle frontal protection. Making sure air flow to the engine is maintained, the Rockarmor bullbar is manufactured out of 3mm steel and features a 63mm diameter cross bar which protects the full front of the vehicle against any potential animal strikes that may harm areas like your head lights, front grill and engine components.

Designed to be functional for vehicles that drive both on road & off road. The Rockarmor's Premium bullbar is put through a strict set of tests that gives you confidence your vehicle and your loved ones will be protected at all times.

Bull Bar Features:

• 63mm tube 3mm Steel
• Twin high lift jack points
• Twin Slotted Antenna Mounts
• Winch Compatible
• Winch plate & Mounting Cradle 2 in 1 System
• LED INDICATOR + Day light running light & FOG LIGHT included
• Bumper Guard included
• Stone guard splash plates included
• Pre drilled Holes for driving lights
• ADR Complied (Locally tested in Adelaide Australia)

ROCKARMOR PHANTOM 9" LED DRIVING LIGHTS

Rockarmor's latest innovation, the Phantom 9 Lights are rugged off-road champions designed to light up the darkest highways and remote tracks, offering unparalleled performance and durability. Built to withstand the harshest conditions, these lights are dustproof and waterproof, ensuring reliability in any environment!

Light Specs:

• IP RATING: IP68
• DISTANCE: 1 LUX @ 1400 METRES
• POWER: 396 WATTS PER PAIR
• LED TYPE: 33 X OSRAM LEDS
• COLOUR TEMP: 6500K
• LUMENS: 13,000 EFFECTIVE LUMENS
• FRAME: FULLY ADJUSTABLE 60 DEGREE ALUMINIUM FRAME
• LENS: POLYCARBONATE

INSTALLATION

To comply with NZTA all daytime running lights should be installed separately to your headlights. Also note that the fog lights need to be adjusted to three degrees down.

If your vehicle's suspension is not upgraded to withstand 60-100kgs, we do recommend that you upgrade the suspension, especially in the front of the vehicle to withstand the weight of the Steel Bumper & optional winch. If your vehicle's suspension is not upgraded, or if you are running factory suspension, your front suspension will sag and the ride will become bumpy which can possibly lead to further damage.

We recommend when fitting the bull bar to leave a minimum 10-15mm gap between the bullbar and body of the vehicle. This will allow for movement where the chassis & body move independently.